I'll take a set or 2 contingent upon approval of photots
| Official Luthiers Forum! http://www-.luthiersforum.com/forum/ |
|
| Speaking of Ziricote... http://www-.luthiersforum.com/forum/viewtopic.php?f=10102&t=7062 |
Page 1 of 1 |
| Author: | Don Williams [ Sat Jun 10, 2006 12:17 am ] |
| Post subject: | |
I have a really nicely quartered board of Ziricote (great figure) that is too narrow for anything but fretboards that I’m thinking of slicing up. I’m wondering if there is any interest out there in sets consisting of a fretboard blank, bridge blank, and bookmatched headplate. The sets would probably go for around $25. This is NOT a sign-up or a sale, I’m just trying to find out if there would be any interest should I decide to do that in the future. If not, it will remain a board and I’ll use it as I need it myself. Eventually. |
|
| Author: | Tomas [ Sat Jun 10, 2006 1:15 am ] |
| Post subject: | |
Sounds cool to me |
|
| Author: | John Mayes [ Sat Jun 10, 2006 1:16 am ] |
| Post subject: | |
[QUOTE=Don Williams] I have a really nicely quartered board of Ziricote (great figure) that is too narrow for anything but fretboards that I’m thinking of slicing up. I’m wondering if there is any interest out there in sets consisting of a fretboard blank, bridge blank, and bookmatched headplate. The sets would probably go for around $25. This is NOT a sign-up or a sale, I’m just trying to find out if there would be any interest should I decide to do that in the future. If not, it will remain a board and I’ll use it as I need it myself. Eventually. [/QUOTE] If it is 3" wide and at least 14" long you can slice them up into soprano uke sets... |
|
| Author: | Don Williams [ Sat Jun 10, 2006 1:45 am ] |
| Post subject: | |
Well, hoestly, if I want uke wood, I would just start cutting up these.. Now THAT's UKE wood! |
|
| Author: | Kim [ Sat Jun 10, 2006 1:54 am ] |
| Post subject: | |
Yes Don, I would be interested, I have a back and side set already and I could use a set no problems. Cheers Kim |
|
| Author: | Graham Steward [ Sat Jun 10, 2006 1:56 am ] |
| Post subject: | |
Put me on the interested list. |
|
| Author: | Brock Poling [ Sat Jun 10, 2006 3:36 am ] |
| Post subject: | |
Yeah, I would buy a couple sets of that if they are nicely figured. |
|
| Author: | RichB [ Sat Jun 10, 2006 4:26 am ] |
| Post subject: | |
Yes, please count me in for 1 set too Don... |
|
| Author: | Terry Stowell [ Sat Jun 10, 2006 4:43 am ] |
| Post subject: | |
I'll take a set or 2 contingent upon approval of photots
|
|
| Author: | Dave Rector [ Sat Jun 10, 2006 5:04 am ] |
| Post subject: | |
I'd be up for a set or two as well. |
|
| Author: | Don Williams [ Sat Jun 10, 2006 5:09 am ] |
| Post subject: | |
Man, you guys are a tough crowd... I mean...I don't even know what photots are! Did you mean faux tots? |
|
| Author: | Don Williams [ Sat Jun 10, 2006 11:19 am ] |
| Post subject: | |
I'm not sure you guys would like this wood, it's looks like mountains and hills and stuff like that, and it's got all these lines like the webs of a spider all over it. |
|
| Author: | Steve Kinnaird [ Sat Jun 10, 2006 1:54 pm ] |
| Post subject: | |
Don, I've done this w/ Ziricote before, and the look is spectacular. If I were you, I'd rescind the offer and keep all the wood for your own personal use. (I'll take two sets myself.) Steve |
|
| Author: | Don A [ Sat Jun 10, 2006 5:45 pm ] |
| Post subject: | |
From someone who has purchased wood from the other Don before, you wouldn't be dissapointed.  If you have any extras I'd be interested. 
|
|
| Author: | Don Williams [ Sun Jun 11, 2006 2:30 am ] |
| Post subject: | |
When and "if" I do this, there will be limited amounts...I'll let folks know. Nothing is set in stone. Seems like there might be some interest. |
|
| Author: | bob J [ Sun Jun 11, 2006 7:34 am ] |
| Post subject: | |
cpunt me in for 2 sets |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|